0%

Phoenix 600W Magnetic Ballast

£39.99 excl. tax

1 in stock

Category:
Description

Description

  • The unit should be mounted on a flat, sturdy non-flammable surface. Alternatively, the unit can be wall mounted.
  • Provide adequate ventilation by ensuring at least a 50mm gap around the unit, and at least 100mm between units.
  • Connect the unit to a compatible reflector and lamp and ensure all packaging/protective coverings have been removed and the lamp is free from smears, fingerprints, etc. Wipe with a clean dry cloth before use.
  • Never switch the unit on without a compatible reflector and lamp plugged in to it.
  • Make sure you use a reflector and lamp that is compatible with the unit. If in doubt ask your supplier.
  • To allow the unit to discharge, never unplug the unit until 5 minutes after the supply has been switched off.
  • The lamp will get hot during use. If the lamp has been on, leave it to cool for at least 30 minutes before touching it and never touch lamp while it is switched on.